Powered by
Digiseller
Digiseller
EPSON Adjustment Program — a program for servicing and configuring printers and MFPs from EPSON when the error "Maintenance required. Contact the service center" appears Version for resetting the diaper overflow error in the models: L1210 L1211 L1216 L1250 L1251 L1256 L3200 L3210 L3211 L3216 L3250 L3251 L3256 L5290 L5296 The program can be used an unlimited number of times, you do not need to buy a reset key each time, which significantly saves money. After payment, a link to the program will be sent to the email address you specified. If you have any payment issues, please write here https://t.me/epson_pro <attention>Before purchasing, read the instructions. If you do not know where the Downloads folder is on your computer, how to unpack the archive, or do not know how to disable the antivirus, do not buy the program. </attention> Contact specialists who will remotely help you reset the error in the printer.
At the time of payment, you will need to provide your email address. A link to download the program will be sent to your email. The program only works on the Windows operating system. To unpack the archive, use the WinRAR program. Instructions for resetting the error. 1. The printer must be connected via a USB cable. 2. The print queue must be cleared. 3. Windows Defender (item "Real-time protection") and other antiviruses should be temporarily disabled. 4. Download the archive (if the browser is blocking the download of the program, search the Internet for instructions on how to bypass the blocking for your browser. Alternatively, use the Mozilla Firefox browser, which does not block the download of the Adjustment Program) 5. Unzip the archive to your desktop. To unpack the archive, use an archiver, such as WinRAR 6. Enter the password from the text document 7. Open the file Adjprog.exe 8. In the Select menu, select the desired printer model 9. In the Port field, leave Auto Selection or select the USB Port with the model name of your printer in parentheses and click OK. 10. The next step is to click on the Particular adjustment mode 11. In the large list of lines we find Waste ink pad counter 12. In the window that appears, you need to click 3 checkmarks: Main pad counter, Platen pad counter, Ink System Pad counter (in this model there are three diaper counters at once, each of them needs to be reset when overflowing) and click Check If you get an error at this point or the program freezes: check everything point by point again. Or reinstall the printer driver. If it doesn't help, try to do everything on another laptop or computer. 13. The numbers with the percentage of occupancy of the counters will appear. One of them should show 100%. It needs to be reset, the other two are optional. 14. Check the box next to the counter with the number 100 and click Initialize. You will be asked to turn off the printer. 15. The last step is to turn the printer off and on again. The device should be ready. <attention>If something didn't work out for you, please write to us before leaving a review. </attention>We will try to respond and help with the reset. We are ready to connect to you and demonstrate the functionality of the program.