Powered by
Digiseller
Digiseller
EPSON Adjustment Program is a program for servicing and configuring EPSON printers and MFPs when the error "Service required. Contact a service center" appears. Version for resetting the ink pad overflow error in the following models: L800 The program can be used an unlimited number of times; there's no need to purchase a reset key each time, which saves you money. After payment, a link to the program will be sent to the email you provided. Only works on Windows (will not work on MacBooks) ✔️Program has been tested multiple times ✔️Unlimited use (no limit on the number of uses) ❗ The program requires disabling your antivirus! Antivirus and Windows Defender will remove the program and display a "Malicious file" warning! https://www.virustotal.com/gui/file/1bee64ab473e4e4d6b33ac177d372c5b3f264ad43576dd479ac2451133cbc764 By purchasing the program, you agree to this fact. Claims such as "I bought an archive containing a virus" will not be accepted. The program has been tested multiple times and does not cause any harm to your computer. Temporarily disable Windows Defender. https://rutube.ru/video/b14dc468f60892f359b556112c4aa150/?r=wd <attention>Read the instructions before purchasing. If you don't know where the Downloads folder is on your computer, how to unzip the archive, or don't know how to disable your antivirus, do not purchase the program! </attention> Contact our specialists who can help you reset the printer error remotely. ❗If you encounter any problems, please do not rush to leave a negative review; this will not speed up the solution. ✔️Any problem can always be resolved PEACEFULLY. ✔️If after purchasing you are unable to download the archive, the program freezes, or displays an error, please read these instructions: https://epson.exaccess.com/page/faq ✔️If after reading the instructions you still cannot reset the error, BE SURE to contact us in the order chat. ⏱️TECHNICAL SUPPORT TIME: 10:00 AM to 5:00 PM, weekdays Moscow time. ❗Support responds only during business hours, on a first-come, first-served basis. Instructions for use are available in the Additional Information section.
When paying, you will need to provide your email. A link to download the program will be sent to your email. The program only works on the Windows operating system. To unpack the archive, use the WinRAR program. Instructions for resetting the error. 1. The printer must be connected via a USB cable. 2. The print queue must be cleared. 3. Windows Defender and other antiviruses must be temporarily disabled. 4. Download the archive (if the browser blocks the download of the program, try Edge browser) 5. Unzip the archive to the desktop. To unpack the archive, use the WinRAR program. 6. Open the Adjprog.exe file 8. In the Select menu, already selected the desired printer model 9. In the Port field, leave Auto Selection or select USB Port with the name of your printer model in brackets and click OK. 10. The next step is to click Particular adjustment mode 11. In the large list of lines, find Waste ink pad counter 12. In the window that appears, you need to click 2 checkboxes: Main pad counter, Platen pad counter and click Check If you get an error at this point or the program freezes: check everything step by step again. If this does not help, try doing everything on another laptop or computer. 13. Numbers with the percentage of the counters will appear. One of them should show 100. It needs to be reset, the other two - optional. 14. Check the box next to the counter with the number 100 and click Initialize. A request to turn off the printer will appear. 15. The last step is to turn the printer off and on again. The device should be ready